HJC -BW-RU 4021
HJC -BW-RU 4021 RO Membrane is important in wastewater treatment units because they effectively remove salts and other contaminants
Description
SPECIFICATION FOR MEMBRANE | |
| Product Code | 2316 |
| BRAND | HJC |
| MODEL | BW-RU |
| TECHNOLOGY | REVERSE OSMOSIS |
| APPLICATION | BRACKISH WATER |
| SIZE | 4021 |
| WORKING TDS | ABOVE 500TDS < 2000 TDS |
| FLOW RATE | 100 TO 125 LPH |
| OPERATING PRESSURE | 90PSI -120 |
| SALT REJECTION | 99.8% |
| TYPE | THIN FILM COMPOSITE |
| USED IN | MINI COMMERCIAL |
| Country of Origin | CHINA |
Hjc 4021 RO Membrane Product Specifications
- Tap water
- Reverse Osmosis (RO)
- Water Softener
- 5C – 45 Celsius(oC) Celsius (oC)
- Wall-mounted
- 110/220 Volt(v) Volt (v)
Product Description
HJC 4021 RO Membrane is important in wastewater treatment units because they effectively remove salts and other contaminants. Many various variables influence RO membrane performance, including feed qualities and operating parameters throughout operation. It is normally put six at a time into single housings, which are then configured into numerous parallel flow streams, or stages. HJC 4021 RO Membrane is extremely good at removing microorganisms. Ultrafiltration does not separate water in the same way as a reverse osmosis membrane does. The standard length of each membrane in industrial applications is forty inches.
Specification
| Membrane Active Area | 36 sq.ft |
| Membrane Material | Composite Polyamide |
| TDS | 7,000ppm |
| Operating Pressure | 225 psi (1.55 MPa) |
| Configuration | Spiral Wound |
| Maximum Feed Silt Density Index | SDI 5 |
| Maximum Operating Temperature | 113 DegreeF ( 45 Degreec) |
| Ph Range Short Term Cleaning | 7.5 pH |
| Maximum Chlorine Concentration | < 0.1 PPM |
| Capacity | 900 gpd |
| Capacity | 250 |
| Membrane Length | 10 mm |
| Membrane Material | Polypropylene |
| Automation Grade | Automatic |
| Pressure | 150psi (10bar) |
| Membrane Diameter | 4″ |
Reviews
There are no reviews yet.