Water Treatment Blog
Practical guides to RO systems, membranes, filtration, water testing and maintenance from ABHIRO Coimbatore.
Stainless Steel Water Dispenser Planning Guide for Offices and Schools A stainless steel water dispenser for an office, school or institution must be selected around user demand, water source, cooling…
Water Softener Maintenance Signs Facility Managers Should Not Ignore A water softener can continue running even when its performance has deteriorated. Facility managers may first notice scale, changes in product…
Commercial vs Industrial RO Plants: A Practical Buyer Comparison Commercial and industrial RO plants both use reverse osmosis membranes to reduce dissolved salts, but they are not selected in the…
How to Understand and Respond to a TDS Reading Quick answer: what does a TDS reading tell you? A TDS reading estimates the total concentration of dissolved ions in water;…
Industrial RO Plant Selection Checklist for Factory Buyers Selecting an industrial RO plant is not simply a matter of choosing a litres-per-hour capacity. The correct system depends on feed-water quality,…
Hardness and TDS require different tests and may need different treatment methods.
Hardness and TDS are related but different measurements. Learn which test to use, what each result means and when to choose a softener, RO or combined treatment.
Practical SDI15 testing guidance for industrial RO feed-water monitoring.
Learn how to perform an SDI15 test, calculate the result and use the trend to investigate particulate-fouling risk before an industrial RO membrane.
Practical backwashing and troubleshooting guidance for industrial ultrafiltration systems.
Use pressure, flow and water-quality trends to schedule UF membrane backwashing, verify recovery and recognise when deeper cleaning or inspection is required.
Practical antiscalant dosing and calibration guidance for industrial RO systems.
Calculate an industrial RO antiscalant dose from feed flow, target dose and product density, then confirm the real output with a timed pump calibration.
Practical pressure-drop checks for industrial RO pretreatment and membrane systems.
A rising pressure difference can reveal a blocked filter, restricted valve, fouled membrane stage or unreliable gauge. Learn how to isolate the cause safely.